Home > Error Occurred > Intel Matrix Storage Manager Option Rom Error Occurred

Intel Matrix Storage Manager Option Rom Error Occurred

Contents

What I had meant was what would happen if I had go into 'Computer management console'->'Device Manager'->'SCSI and RAID controllers' and disabled one of the controllers then restarted the computer? Western Digital tools just told me I had an error but the tools did not find any issues when set to IDE and tested. Please try the request again. Re: Raid1 "Error Occurred(0)" on Good Drive After Replacing SMART Event Drive Diego_Intel Jun 11, 2013 11:04 AM (in response to Jeff11) Please post the system report generated by the Intel(R) http://offsethq.com/error-occurred/intel-matrix-storage-manager-error-occurred-0-1.html

Can't find your answer ? All service packs and updates installed. > Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor > Does anyone have any suggestions on how I can Using Western Digital diagnostic tools, I tested each drive and no errors in either drive were discovered. Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor Does anyone have any suggestions on how I can resolve this error message? #2 (permalink)

Intel Rapid Storage Technology Raid Error Occurred (0)

Restarting the System no OS was found and the RAID system reported 3 of the 4 HDDs to have failed at the same time! Then follow these steps to resolve the issue: Launch the Intel Matrix Storage Console software that you now have from the installation and open up the tree view to examine my Michael Daly wrote: > John wrote: > >> I wonder what the consequences will be by disabling a RAID controller? > > Since it's a RAID0 config, your drives will look

  1. Once I got the system running on the new drive, I installed the old drives as seperate drives, and lo and behold, one of the drives started reporting a SMART error.!
  2. What I can see on that report, is that this system is using a really mature driver and option ROM version.You should try a BIOS update for this system to update
  3. Are you saying that the backup should be done to an external drive (other than the two RAID drives)?
  4. The error (in the Intel application) turned out to be a read error.
  5. I just don't want to make things worse.Any advice would be appreciated.ThanksJeff Like Show 0 Likes(0) Actions 6.
  6. Like Show 0 Likes(0) Actions 7.
  7. My point is, One of the drives may have developed a SMART error, but because they are in a RAID 0 array, nothing can report the SMART error in detail, and
  8. Cross-listing here...http://www.tomshardware.co.uk/forum/252965-14-transfer-raid-array#t1798137 Ask a new question Read More NAS / RAID Storage Matrix Intel Related Resources Intel Matrix Storage -- Can't boot RAID0+1 -- OPTIONS??

may be one of you can help. I did first verify that all connections, SATA and power supply to the HDDS were OK. All Rights Reserved Tom's Hardware Guide ™ Ad choices ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.6/ Connection Error Occurred (0) Hard Drive All service packs and updates installed. > > Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor > > > Does anyone have any suggestions on

After installing this and rebooting, I just went in and marked the volumes as normal. Raid 0 Error Occurred Thanks posters, and thanks Google Search for meaningful hits. #17 (permalink) 05-26-2012, 05:26 PM Hellmut1956 Junior Member Join Date: May 2012 Posts: 1 3 of 4 HDDs failed This is what threw me off. > I backed everything up and I'll clone the dying drive to an identical > replacement. > I ran the Western Digital diagnostics again and Re: Raid1 "Error Occurred(0)" on Good Drive After Replacing SMART Event Drive Diego_Intel Jul 9, 2013 11:37 AM (in response to Jeff11) A data back up to another drive should be

Your cache administrator is webmaster. Intel Matrix Storage Console Right-click on each drive and select the popup menu option "Mark as Normal". Please turn JavaScript back on and reload this page. I wonder what the consequences will be by disabling a RAID controller?

Raid 0 Error Occurred

The time now is 08:54 PM. -- Default Style 2 Wireless Support Forum - Archive - Top - Privacy Policy - Cookie Policy - Terms of Use - Disclaimer Powered by But I could not believe that more than ob HDD would fail at the same time, now 3 failed! #18 (permalink) 08-18-2013, 04:32 AM greg0422 Junior Member Join Intel Rapid Storage Technology Raid Error Occurred (0) Right-click on each drive and select the popup menu option "Mark as Normal". Raid 0 Error Occurred Fix As far as I can figure out, an error reading data from any disk in the array one time at boot seems to cause this error message, and the message persists

Intel Matrix Storage System Raid 0 and 5 question. check my blog Hard Drive 0 is the hard drive that was replaced, and which was rebuilt by the RAID utility. (The new hard drive was installed in the system.)Why is the hard drive Mike Walsh alt.comp.hardware 1 07-27-2005 05:58 PM All times are GMT. My symtoms were slightly differenrt than your, mine would randomly lock up. Ssd Error Occurred 0

Anyway: I installed the Intel Matrix Storage Manager which IS compatible with my hardware (even though my hardware was very old - from 2004). It may be a drive in the process of dying (so a SMART check to find that out) or an interface problem. In here the drives show the reported error as well. this content Setting up RAID 5 with Intel Matrix Storage Manager & XP Intel Matrix Storage on ICH9R, creating raid RAID installation problems with Intel Matrix Storage Manager solved howto replace faulty disk

Or, will the data on the existing RAID drives be recognized when the drives reconfigured as non-RAID?Thanks.Jeff Like Show 0 Likes(0) Actions 8. Intel Rst As requested, posted my experience in the other topic. All service packs and updates installed. > > Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor > > > Does anyone have any suggestions on

This option is illustrated in the Intel(R) Matrix Storage Manager user guide on page 18.

Re: Raid1 "Error Occurred(0)" on Good Drive After Replacing SMART Event Drive Jeff11 Jun 17, 2013 4:01 PM (in response to Diego_Intel) Hello Diego,Maybe you can help me look at the Any suggestions on how to obtain the correct upgrade (being that there is no longer any support for this hardware)? It is provided for general information only and should not be relied upon as complete or accurate. Intel Rapid Storage Technology Windows 10 Chkdsk also reported no errors.

Intel ICH86/DO/DH SATA RAID Controller: Driver date: 5/11/06 Driver version: 6.0.0.1022 JMicron JMB36X Controller: Device type: SCSI and RAID controllers Manufacturer: JMicron Technology Driver date: 12/5/2006 Driver version: 1.17.8.1 Device manager Right-click on each drive and select the popup menu option "Mark as Normal". Do I now need to replace the second original drive? (The new drive was a Seagate that was similar to the one removed. have a peek at these guys I didnt like the look of this error when i first saw it but doing this seems to have fixed the problem completely thanks alot #16 (permalink) 11-02-2011, 12:34

Show 8 replies 1. Like so: http://i10.tinypic.com/2qvgtpt.jpg > Mike To answer someone else's question: Yes, I replaced the cable on drive 0. #10 (permalink) 01-08-2007, 12:01 AM Michael Daly Guest Posts: n/a You'll always be able to boot to BIOS to reset. Then delete the RAID 1, setting both hard drives as non RAID drives and then create a new RAID 1 using one of the hard drives as the source, this is

Try to back up data immediately.' > The '(0)' (I believe) refers to the device number and is not an error > code. Usually re-booting the system got it going again but I could never find the problem. I do have a full OS partition backup, but still.... #8 (permalink) 01-07-2007, 10:43 PM Michael Daly Guest Posts: n/a Re: "Error Occurred(0)" with RAID 0. I ran the Western Digital diagnostics again and it says that everything is peachy. #12 (permalink) 01-08-2007, 05:22 PM Arno Wagner Guest Posts: n/a Re: "Error Occurred(0)" with

Anyway: I installed the Intel Matrix Storage Manager which IS compatible with my hardware (even though my hardware was very old - from 2004). What does it mean? I'm guessing the four we see in the picture are for the Intel chipset and the others are elsewhere - possible for eSATA and are exposed outside the box. Recently I did get some chkdsk errors on my RAID 0 array which caused the second drive to also display the Error Occurred (0) message.

After you have backed up, maybe connect the drive directly and post its SMART attributes here. The computer, of course, couldn't boot but I was able to run the WD diagnostics from a bootable floppy for each separate HD. Dying disk.